【分享】齿轮届的泰山北斗——李特文博士

mrmrw

登录/注册后可看大图

Contact Information: ERF 2033 Phone: (312) 996-2866 Fax: (312) 413-0447 Email: FLitvin@uic.edu Laboratory: 4227 SEL Phone: (312) 996-8126

F.L. Litvin
Director, Gear Research Center B.S., Mechanical Engineering (1937)
Leningrad Polytechnical Institute Ph.D., Mechanical Engineering (1944)
Tomsk Polytechnical Institute DocTechSci, Mechanical Engineering (1954)
Leningrad Polytechnical Institute

• Inventor of the Year, UIC, 2001
• Engineering Distinguished Professor Emeritus, UIC, 2000
• Honorable Dr. Degree from Miskolz University, Hungary, 1999
  

Selected Publications Litvin, F.L., Gear Geometry and Applied Theory, Prentice Hall, 1994. Litvin, F.L., Applied Theory of Gearing: State of Art, Special Issue of the J. of Mechanical Design and the J. of Vibration and Acoustic, June, 1995, Vol. 117, pp. 128-134. Litvin, F.L., Chen, NX, and Chen, J.-S., Computerized Determination of Curvature Relations and Contact Ellipse for Conjugated Surfaces, J. Computer Methods in Applied Mechanics and Engineering, 1995, 125, pp. 151-170. Litvin, F.L., et al, Kinematic and Geometric Models of Gear Drives, J. of Mechanical Design, Dec., 1996, Vol. 118, pp. 544-550. Research Interests Dr. Litvin's research interests include the theory of gearing and application methods for generation of gear tooth surfaces; computerized simulation of meshing and bearing contact; computerized determination by measurements of gear real tooth surfaces and minimization of deviations; generation and design of new types of gears; and computer controlled generation of surfaces.
******************
来源：http://www.mie.uic.edu/bin/view/MIE/ProfileLitvin#

qdtruck

老先生健在？

mrmrw

还是齿轮研究中心的主要负责人那，当然是“活着”的！

360jcw

关注一下啦啦啦啦啦啦

真的好菜

景仰ing

hyfjy

李大师的名著《齿轮啮合原理》在几十年前就用最现代的数学基本定律把各类齿轮的啮合讲得很清楚了，记得当我看到李大师在讲述弧齿锥齿轮副时，有张图，画出了根据数学计算得出的大轮工作面瞬间啮合线与啮合区域，真的让人很震惊。（P：433）

mrmrw

在国内，李特文的弟子很多，比较有名的是北航的【张启先】院士。张院士已经去世了！

15506198942

不是中国的

284618282

牛！！

360jcw

太深奥了啊   看不懂啊