非圆齿轮的设计和加工(non circlegear design and machining )
本产品有以下特点:1)设计完全自主研发,可根据要求设计;
2)齿廓是经过精确计算, 可满足模具成型的要求,可以控制齿顶间隙,齿根间隙,齿侧间隙,等参数;
3)根据客户的任何要求(如安装尺寸,传动比,角度关系......),自主设计轮系和齿轮节曲线(如椭圆,对数螺旋,抛物线......),
并能给出相应齿轮加工参数(插齿或滚齿).
4)包括内凹的节曲线和相应的齿廓,齿根和齿顶的过度曲线;
5)可对根切进行校验;
6)如需要可设计专用检具(不需要专用设备),对批量产品进行精度检测,保证量产产品质量.
联系方式:
QQ:358006033
邮件:358006033@qq.com
The product have the following points:
1) the gear are design by myself, and can meet any specifical requirement;
2) the gear profile was calculatedwith high accuracy,and can be apply to mass production with mould;
3) can design the gear system and pitch curve as customer's requirements,(e.g. moutain distance, gear ratio, angles relationship....),such as ellipse,logarithm spiral gear,parabola...),and give the machining parameter of hobbing or sharpening;
4) can design the pitch curve,including concave,teeth profile, teeth root and adjacent line,teeth tip line;
5) analyze the undercut for the gear root;
6) can design special inspection (not need special equipment), to check the mass prodcution product, and then make sure the mass product within specification;
email:358006033@qq.com
QQ:358006033
补充内容 (2022-4-16 20:46):
也可以 加微信(358006033) 有特点.
能否告知附件图是什么参数(中心距,模数,压力角,侧隙等)的设计结果?
能发个变形椭圆齿轮的图上来吗? 非圆齿轮齿廓的设计,
在国内齿轮专家吴序堂教授著的<非圆齿轮及非匀速比传动>,
和李福生先生著的<非圆齿轮与特种齿轮传动设计>书中,都有论述.
要想精确计算出齿廓.首先得领会非圆齿轮的"渐屈线",
再加上良好的数学基础和编写程序的能力,就OK了! 大胆的问一下,有程序没?想参考一下 本设计最大的特点是包含了过渡曲线,和任意调整间隙(保证啮合率的前提下).
按要求可提供设计图纸.
charlie_heshilin@163.com 楼主用Gif Animator,把图片做成动画,宣传效果更好。 谢谢提示! 我还想利用sn3的框架做个非圆齿轮包络的演示呢,但不是专业做这个的还没深入研究。楼主完全可以做个demo发上来,不用有任何输入,就把那些图用动画演示一下就好。 请问楼主用什么软件编的程序? 自己编的,[关键是节曲线.